Description

APC Back-UPS Pro External Battery Pack (BR24BPG)

APC Back-UPS Pro External Battery Pack (BR24BPG)

APC Back-UPS Pro External Battery Pack (for 1500VA Back-UPS Pro models)

Output

  • Battery Output Voltage : 24

Input

  • Number of Power Cords : 1

Batteries & Runtime

  • Battery type : Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
  • Included Battery Modules : 2
  • Battery mounting : Stand alone battery stack
  • Expected Battery Life (years) : 4 – 6
  • RBC Quantity : 1
  • Battery Volt-Amp-Hour Capacity : 372

Physical

  • Maximum Height : 11.85inches (301MM, 30.1CM)
  • Maximum Width : 4.41inches (112MM, 11.2CM)
  • Maximum Depth : 15.04inches (382MM, 38.2CM)
  • Net Weight : 29.48lbs. (13.4KG)
  • Shipping weight : 32.12lbs. (14.6KG)
  • Shipping Height : 15.75inches (400MM, 40.0CM)
  • Shipping Width : 9.45inches (240MM, 24.0CM)
  • Shipping Depth : 19.33inches (491MM, 49.1CM)
  • Color : Black

Environmental

  • Operating Temperature : 32 – 104 °F (0 – 40 °C)
  • Operating Relative Humidity : 0 – 95 %
  • Operating Elevation : 0-30000ft (0-9000meters)
  • Storage Temperature : -15 – 45 °C
  • Storage Relative Humidity : 0 – 95 %
  • Storage Elevation : 0-50000ft (0-15000meters)

Conformance

  • Approvals : TUV
  • Standard warranty : 2 years repair or replace_

Sustainable Offer Status

  • RoHS : Compliant
  • REACH : REACH: Contains No SVHCs
  • PEP : Available in Documentation tab
  • EOLI : Available in Documentation tab
  • Proposition 65 Warning : Available in Documentation tab

Availability

  • Green mode : Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
  • Boost and Trim Automatic Voltage Regulation (AVR) : Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models).
  • Battery failure notification : Provides early-warning fault analysis on batteries enabling timely preventive maintenance
  • Automatic self-test : Periodic battery self-test ensures early detection of a battery that needs to be replaced.
  • Transformer-block spaced outlets : Protect equipment with input transformer blocks without blocking access to other receptacles.
  • Customizable voltage-transfer points : Adjust the voltage points (widen or tighten the range) where your UPS transfers to battery to maximize useful battery life and protect sensitive electronics.
  • Customizable voltage sensitivity : Toggle between pre-determined voltage-transfer points depending on your power quality (high, medium or low sensitivity), maximizing useful battery life and protecting sensitive electronics.
  • Intelligent battery management : Maximizes battery performance, life, and reliability through intelligent, precision charging.
  • Cold-start capable : Provides temporary battery power when the utility power is out.

Protection

  • Battery and surge protected outlets : Back up and protect your hardware and data during power outages, surges and spikes.
  • Dataline surge protection : Provides protection of connected equipment from power surges on the data lines.
  • Surge only outlets : Protect secondary electronics from surges and spikes without reducing battery power used to run primary electronics during an outage.

Additional information

Product Type
Product Type

Brand
Brand

UPS Spec
UPS Application

UPS Form Factor

Tower

UPS Input Voltage

1PH 230V

UPS Output Voltage

1PH 230V

UPS Startup Service

No

Loader Loading...
EAD Logo Taking too long?
Reload Reload document
| Open Open in new tab

Download [167.12 KB]

Reviews

There are no reviews yet.


Be the first to review “APC Back-UPS Pro External Battery Pack (BR24BPG)”